Girman Damper

Aiki

1. Kayan ƙarfe na waje shine 304 ko 316 bakin karfe.

2. Kafin shafi, da bakin karfe substrate an duba don tabbatar da cikakken welds da dace surface jiyya.

3.Coating abu ne ETFE fluoropolymer thermoplastic guduro.

4. Kauri na shafi yana kan matsakaicin 260μ.

5. Aikin gwajin ramin fil ɗin da aka yi ta hanyar gwajin wuta na DC a 2.5KV / 260μ don tabbatar da murfin kariya na nole kyauta.

Aika mana imel

Cikakken Bayani

Tags samfurin

Nau'in	Diamita (mm)	Kauri (mm)	Tsawon (mm)	Kayan Ruwa		Aiki
				sus	Mai rufi
Propeller Blade Damper	Φ800-Φ1150	2.0	350	(SUS)	(PVDF)	Ohms / Pneumatic / Electric
Propeller Blade Damper	Φ1200-Φ1600
Propeller Blade Damper	Φ1650-Φ2000

1. The Volume Damper walda dutsen dutse dole ne m, don cimma daya-gefe waldi da biyu-gefe forming, ciki dole ne a goge santsi, babu pores, da nadawa gefen nadawa surface ya zama lebur (kimanin 90 °).

2. Bangaren bututun iska da za a fentin (ciki har da filin flange a cikin bututu) dole ne ya zama sandblasted, ƙwaƙƙwaran sandblasting dole ne ya dace da roughness na 3.0 G / S76, 40μm ko fiye, da ragowar yashi barbashi da ƙurar ƙura a waje. dole ne a cire bututun bayan yashi.Tabbatar da ko saman aikin bututun yana da tsabta kuma an rufe kayan aikin da foil na aluminum.

3.100% jimlar ingancin dubawa (gano kauri na fim, ganowar pinhole), tare da gwajin kauri na fim don gano kauri na fim.Kaurin fim ɗin shine 260 ± 30 μm.Ana amfani da na'urar gano bakin ruwa don gano ko rufin yana da ramuka.Daidaita daidaitaccen ƙarfin ganowa zuwa 2.5KV, idan akwai alluran da ke buƙatar gyara ko sake yin aiki.Kaurin fim ɗin da sakamakon gwajin pinhole bayan ingantaccen dubawa ya kamata a rubuta shi a cikin "Form Inspection Quality Inspection Duct Coatung".

4.Duct diamita akan 2000mm yana samuwa akan buƙata.An gina kauri akan SMACNA.Hakanan ana iya canza shi azaman buƙatar abokin ciniki.